IN STOCK NOW

This is the LNB for the new 118°W (Anik F3 / 118.7° / 118.8°) satellite.

Works with both Free-to-Air and Original DN Receivers!

• Requires: 30-inch or larger dish
• Compatible with DirecTV, Free-to-Air (DiSEqC, 22KHz), and legacy switches (SW21, SW44, etc)
• Not compatible with DishPro switches and/or DishPro (stacked) LNB's

SPECS

• Polarization: Circular
• Input Frequency: 11.70 - 12.75 GHz
• LO Frequency: 10.750 GHz
• Noise: 0.3 dB


• Dual-output (ready for 1 or 2 receivers)

SETUP INSTRUCTIONS (When using an FTA receiver as a signal finder)

Using a 30-inch or larger dish, aim with the following settings:

• Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
• LNB Type: Standard (or Single)
• LO Frequency: 10750 or 10600 MHz

Finally, do an AUTO SCAN or a BLIND SCAN

For some the following settings may work better or give you more channels:

• LNB Type: Universal
• LO Frequency: 9750 MHz
• HI Frequency: 11250 MHz

ALTERNATIVE SETUP

If there are any missing channels, MANUALLY scan them in. You can refer to the channel list at Lyngsat.com

You may also load this satellite using SharpC's Channel Master program.